F75 Long Reach
Medium Wire Staplers
Uses 1/2" crown 20 gauge F-Wire 5/16 to 1/2"|
Widely used in corrugated box fabrication.
F wire fasteners for this tool: 5/16 to 1/2" in length.
The easy handling and speed of
the Senco D
Series Staplers cut fastening time to practically nothing. Operator
fatigue is virtually eliminated. Less experienced employees can reach
operating proficiency in a couple of hours. These Senco DFP self clinching staplers are
designed for minimum maintenance, fast loading and long service life.
Used wherever two materials must be stapled and clinched. Used in light assembly operations joining wood and corrugated or other materials together. In shoemaking, used for attaching wooden or steel shanks, upper to insoles, vamps, straps, ornaments, and buckles. Widely used in corrugated box fabrication.
Height: 7-3/8" (186 mm)
Length: 8" (318 mm)
Weight: 2.7 lb (1.2 kg)
Lip Length: 1/2" (13 mm)
Fasteners: 1/2" Crown. 20-Gauge Staples. 5/16"—1/2" Lengths.
Reg. Operating Pressure:
70—90 psig (4.8—6.3 bar)
One year warranty
END OF PAGE